Can I Put a Mini Fridge Inside a Cabinet?

Can I Put a Mini Fridge Inside a Cabinet?

When accommodating a full-size fridge is a problem, a mini-fridge comes to the rescue.

You can keep a mini-fridge in the bedroom, living room, dorm room, etc. A mini-fridge is the answer if you want to keep a few snacks and drinks nearby.

But where do you put the mini-fridge? Do you leave it on a countertop or on the ground by the door? And more importantly, can you put a mini-fridge in a concealed compartment, i.e., a cabinet?

If you’re unsure whether a mini-fridge can go inside a cabinet, we heard you. Read on to know more about your mini fridge’s placement options!

Yes, you can put a mini-fridge inside a cabinet by ensuring proper ventilation around it. If you leave a two-inch buffer around a mini-fridge in an enclosed space, it’ll work fine. Since your mini fridge’s fans will require some space to release the extra hot air, stuffing it in a narrow space is unsafe. Provide a sufficient ventilation space to your mini-fridge, and you’re good.

Putting a mini-fridge inside the cabinet is very convenient, especially if you like your space tidied up at all times.

However, doing this without taking care of your mini fridge’s working mechanism can be counterproductive.

Some fridges have ventilation fans on the backside while others have front-facing vents, but both need breathing space. The biggest concern with putting a mini-fridge in the cabinet is its vents getting blocked. Therefore, it’s in your best interest to provide your mini-fridge with a buffer zone.

Another reason for maintaining optimum space around a mini-fridge is motor overheating. Motor overheating is bound to happen when the fridge releases hot air and bounces back instead of dissolving in the surroundings.

So if you want to put a mini-fridge in a cabinet or drawer, leave some breathing space around it. You can carve ventilation holes or take out the cabinet’s back panel. You don’t need a wide space around the mini-fridge; 2-3 inches of space on all sides is enough.

If your cabinet is made of plywood or another not-so-sturdy material, make sure the underside of your mini-fridge doesn’t touch it. You can place small marble pieces or cork plugs under the fridge’s feet to elevate them.

Putting a mini-fridge in the cabinet is not risky if you follow a few safety protocols (more on this later) and take care of its ventilation. So, no more worrying about where to keep the new mini-fridge. Empty a cabinet, and you’re good to go.

Is it safe to put a Mini Fridge in a cabinet or closet?

Yes, it’s safe to put a mini-fridge in the cabinet or closet if there are no combustibles around it. Since a fridge needs space to release hot air, you must put it in a roomy cabinet or closet. If you stuff the mini-fridge in a wooden cabinet and there’s no way its hot air can escape, it’s damaging for both surfaces.

Some people mistake stuffing a mini-fridge in a narrow cabinet, thinking it’ll be alright. But that’s not always the case. We have heard of instances where kitchen cabinets got damaged because of mini-fridges, so it’s better to be safe than sorry.

Once you decide to put your mini-fridge in a cabinet, closet, or drawer, leave a buffer zone around it for seamless airflow. A fridge needs sufficient ventilation to circulate the hot air because otherwise, its motor will run at its full capacity and result in extra energy consumption.

Another factor worth considering when you put the mini-fridge in a cabinet is the presence of combustible surfaces. Since the air surrounding your mini fridge can get extremely hot inside the cabinet, it can pose fire threats.

Therefore, it’s better to designate one cabinet for the mini-fridge and remove everything else from it.

How to Install a Mini Fridge Into a Cabinet?

Now that your doubts are cleared about putting a mini-fridge in the cabinet, let’s help you do it. If you’re unsure about the safety measures and essential steps to follow while housing a mini-fridge in a cabinet, we got you.

Follow these easy steps to keep your mini-fridge safe and accessible:

  1. Measure your Cabinet and Mini Fridge

Providing a mini-fridge with sufficient ventilation is mandatory for its safety and performance. When you plan to move the mini-fridge to a cabinet, measure both things for a clearer decision.

If your cabinet is big enough to accommodate the mini-fridge without blocking its ventilation, you’re sorted. But if you feel the mini-fridge will be stuffed inside the cabinet, you’re probably better off.

Ensure a two-inch buffer between your mini-fridge and the cabinet to maintain its well-being. It’s better to measure the cabinet or drawer first and get a mini-fridge later to avoid the sizing issue.

  1. Remove Combustible Shelving from the Cabinet

Once you select a cabinet that can easily accommodate your mini-fridge, check its surface material. If it’s plywood or laminated wood, it’s prone to get damaged because of the heat.

Therefore, it’s better to take it out or cover it. If you can remove the laminated layer, it’s good. But if that’s not doable, you can also use a heat-resistant pad for the mini-fridge.

This pad will protect the cabinet’s inner walls from heat damage by containing excess heat emitted by the mini-fridge. If there’s something explosive in the cupboard, remove it as well.

  1. Carve Ventilation and Access Holes in the Cabinet

If you’re to put the mini-fridge in an enclosed cabinet, you’ll have to provide an additional ventilation source. But that doesn’t mean ruining the entire wooden cabinet; a few holes can do the job.

Carve one or two holes in your kitchen cabinet’s backside for added ventilation and cord access. This trick will prevent overheating so your mini-fridge works at its optimum capacity.

  1. Adjust the Mini Fridge

Place your mini-fridge inside the cabinet and pass its cord through the ventilation hole to access the switchboard. Move your hand around the mini-fridge to ensure it has breathing space on all sides.

For the cabinet surface under your mini-fridge, you can use small marble pieces or silicone plugs to elevate it a bit. This elevation will protect the cabinet’s interiors and ensure your fridge has a seamless airflow.

  1. Plug it in and Check

Plug your mini-fridge in the wall socket to check if it’s working fine, and that’s all. Putting a mini-fridge in the cabinet is quick and safe if you take care of the sizing issue.

Safety Concerns for Storing a Mini-Fridge in a Cabinet or Closet!

If you’re concerned about putting your mini-fridge in an enclosed space, you’re justified. We have heard of instances where fridges damage their surroundings because of overheating, something you’d like to avoid.

That’s why we have listed the risks associated with putting fridges in cabinets and closets so that you have a realistic picture.

Here’s what can potentially go wrong if you put a mini-fridge in the cabinet:

  • Overheating

The heat emitted from a mini-fridge can damage its surrounding surfaces like the cabinet’s interiors and walls. That’s why it’s recommended to maintain a distance between the mini-fridge and the cabinet it resides in.

  • Fire Hazard

Although it’s very rare, putting a mini-fridge in the cabinet can result in sparks and fire. This usually happens when the fridge’s motor is overworked and very high outside temperature.

  • Breaker Tripping

When a motor is overworked, it can trip the breaker; your mini-fridge is no exception. If you ignore the mini fridge’s ventilation requirements and it’s on 24/7, it can trip the electricity breaker. 

  • High Energy Consumption

If a fridge’s air circulation is interrupted, it works extra hard to keep things cool, resulting in extra energy consumption.

How do you hide a Mini-fridge in a cabinet?

If your mini fridge has ventilation fans on the backside, carve 2-3 holes in the cabinet’s back to ensure uninterrupted air circulation for it. When your mini fridge has sufficient ventilation and air circulation, you can close the cabinet’s door to hide it from sight. If you prefer keeping the kitchen cabinet’s door closed at all times, remove its back panel to prevent overheating threats.

Final Thoughts

Putting a mini-fridge in the cabinet or closet is safe and convenient. If you don’t have enough counter space or prefer keeping electric appliances hidden, select an empty cabinet for your mini-fridge, and you’re good.

However, providing the mini-fridge with breathing space is essential because it can get overheated otherwise. No matter where you put the mini-fridge, give it some breathing space so that its motor doesn’t get overworked or overheated. Ensure an interrupted airflow for your fridge and keep the energy bill under control; we wish you luck!

Leave a Comment

Your email address will not be published.

Scroll to Top